Best Masking Tape For Painting Skirting Boards

4 make sure you are tight up to the skirting board with the masking tape or slightly overlapping onto the skirting board.

Best masking tape for painting skirting boards.

Another useful tool is a paint shield. So if you re painting the top edge of the skirting board you ll apply masking tape to the wall where it joins the skirting. 2 find the end of the masking tape and use the roll as a guide holding the tape tight against the skirting board. It works in much the same way as masking tape putting a block between the paint brush and the surface where you don t want paint.

Using a paint shield. For a really smart finish you should apply masking tape to the edge of the floor. You can also clean with soap and water to ensure the surface is fully prepped for painting. Rid the skirting board of any dust and loose paint by brushing with a soft brush.

3 start in a corner and pull out to the end. Masking up with masking tape how to prepare a room for painting or decorating with masking tape. The trick is to mask up the carpet so that you do not get any paint on the carpets. For protecting your carpet when painting skirting boards you ll need to use 2 at least masking tape.

1 first of all you must have a good quality masking tape with a width of 2 no thinner. Use a pair of scissors to cut your masking tape so you have a straight edge. Leave the masking tape down if re applying a coat if you notice that you are going to need multiple coats that s usually the case to get the best finish possible. Gloss paint or satin paint the choice is up to you.

Painting skirting boards can be tricky when you have carpets. Paint the skirting boards once you have the masking tape down you can safely paint around the room avoiding any paint reaching the carpet for the best finish possible. How to mask up before painting and how to use masking tape to prepare a room when decorating or varnishing so as to protect carpets windows light switches units glass in window frames etc. Then place the masking tape along where the skirting board meets the floor leaving a slight lip about 1 2 cm 0 20 in that is pressed onto the skirting board itself.

Place the cut straight edge in one corner of the room with the cut straight edge up against the skirting board of one wall and the roll next to the skirting.